CMC-Series, Solid State RF Power Amplifier

 

1 – 1000 MHz

10 – 500 watts
Minimum Rated Power
"Class A" RF Power Amplifier

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - CMC SeriesInstruments for Industry, CMC-series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 500 watts in the 1 – 1000 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 1000 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “CMC-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model
Number
Frequency
Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
CMC10 1 – 1000 10 10 40 0.1 25 19 x 24 x 5.25
CMC25 1 – 1000 25 25 44 0.2 30 19 x 24 x 5.25
CMC50 1 – 1000 50 40 47 0.4 35 19 x 24 x 7.0
CMC100 1 – 1000 100 80 50 0.5 40 19 x 24 x 7.0
CMC150 1 – 1000 150 120 52 0.8 50 19 x 25.25 x 8.75
CMC200 1 – 1000 200 160 53 1 70 19 x 25.25 x 10.5
CMC250 1 – 1000 250 200 54 1.5 80 19 x 25.25 x 10.5
CMC300 1 – 1000 300 250 55 2.2 90 (2X) 19 x 25.25 x 10.5
CMC350 1 – 1000 350 300 56 3.0 100 19 x 24x 8.75
CMC500 1 – 1000 500 400 57 4.0 200 (2X) 19 x 25.25 x 10.5

 

Standard Features for IFI CMC-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI CMC-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI CMC-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved