1.5 – 30 MHz

10 – 5000 watts
Minimum Rated Power
"Class A" RF Power Amplifier

Solid Stae Rf Power Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SXXL SeriesInstruments for Industry, SXXL-Series solid state amplifiers provide outstanding RF performance. These SSPA products are available in a wide range of power levels from 10 watts to 5000 watts in the 1.5 – 30.0 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF solid-state amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 30 MHz.

Our RF SSPA's feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SXXL-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Solid-State
Amplifier
Model Number
Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SXXL10 1.5 – 30 10 10 40 0.1 25 19 x 24 x 5.25
SXXL25 1.5 – 30 25 25 44 0.2 28 19 x 24 x 5.25
SXXL50 1.5 – 30 50 50 47 0.4 32 19 x 24 x 5.25
SXXL100 1.5 – 30 100 80 50 0.5 36 19 x 25 x 7.0
SXXL150 1.5 – 30 150 120 52 0.8 40 19 x 25 x 7.0
SXXL200 1.5 – 30 200 150 53 1.4 50 19 x 25 x 7.0
SXXL250 1.5 – 30 250 200 54 1.6 60 19 x 25 x 7.0
SXXL350 1.5 – 30 350 250 56 3 80 19 x 24x 8.75
SXXL500 1.5 – 30 500 350 57 4 100 19 x 24x 8.75
SXXL1000 1.5 – 30 1000 800 60 8 150 19 x 25.25 x 10.5
SXXL2000 1.5 – 30 2000 1600 63 15 200 (2X) 19 x 25.0 x 14
SXXL3000 1.5 – 30 3000 2500 65 20 500 Rack Integrated
SXXL5000 1.5 – 30 5000 4500 67 30 1000 Rack Integrated

 

Standard Features for IFI SXXL-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SXXL-Series SSPA Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW/3KW/4KW amps. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SXXL-Series SSSPA's

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved