10 kHz – 2 GHz10 – 200 watts
|
IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS and GAN Transistors provide reliable brute-power performance at frequencies up to 2.0 GHz. Our RF power amplifiers feature individually shielded aluminum assemblies for the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities. From the ground up, the “SMXE-2G SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments. |
Model Number | Frequency Range (MHz) |
Rated Power (watts min.) |
P1dB Power (watts min.) |
Gain (dB min.) |
kVA | Weight (lbs.) |
Size (Inches) (W x D x H) |
SMXE-2G-10 | .01 – 2000 | 10 | 10 | 40 | 0.1 | 35 | 19 x 24 x 7.0 |
SMXE-2G-25 | .01 – 2000 | 25 | 25 | 44 | 0.2 | 40 | 19 x 24 x 7.0 |
SMXE-2G-50 | .01 – 2000 | 50 | 50 | 47 | 0.4 | 75 | 19 x 24 x 7.0 |
SMXE-2G-100 | .01 – 2000 | 100 | 80 | 50 | 0.5 | 80 | 19 x 25.12 x 10.5 |
SMXE-2G-150 | .01 – 2000 | 150 | 120 | 52 | 0.8 | 120 | 19 x 25.12 x 10.5 |
SMXE-2G-200 | .01 – 2000 | 200 | 150 | 53 | 1.5 | 150 | (2X) 19 x 25.12 x 10.5 |
Standard Features for IFI SMXE-2G Series Solid State Amplifiers
- VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
- * Alternate Prime Power (specify at time of order)
- GPIB IEEE 488 and RS232 Remote Control
- RF Sample Port on the Front Panel, 112R for rear panel
- Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
- Gain Control Local and Remote, 30 dB range
- RF Input/Output Connectors on the Front Panel, 118R for rear panel
- Internal Systems Diagnostics and Status Indicators
- Total/Operate Elapsed Time Metering in hours
- RF Safety Interlock
- Forward/Reflected Power Indication simultaneously on Front Panel display
IFI SMXE-2G-Series Solid State Amplifier Specifications
- Input/output Impedance: 50 ohms
- RF Input/ Sample Connectors: Type N Female, unless specified otherwise
- RF Input/ Sample Connectors: Type N Female, unless specified otherwise
- RF Output Connector: Type N Female. Other connectors available by request or specification
- Input VSWR: 2.0:1
- Output VSWR: 2.5:1
- Operating Temp: 0º to 50º C
- Non-operating Temp: -40º to 70º C (50,000 feet max)
- Humidity: 95% without condensation
- Altitude: 10,000 feet
- Cooling System: Air cooled, self contained
- Modulation: AM, FM, Pulse
- Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
- Spurious Outputs: <-60 dBc nominal
- Harmonics: -20 dBc minimum @ Linear Power
- Standard Prime Powers:
100, 115, 120 VAC ±10% 50/60 Hz, single phase
220, 230, 240 VAC ±10% 50/60 Hz, single phase
100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
- Special Prime Powers other then listed are subject to availability
Some Available Options for IFI SMXG-2E-Series Solid State Amplifiers
- Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
- Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
- Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
- Option 113: Chassis slides for a 19" rack mounting
- Option 118A: RF Input On Front Output On Rear
- Option 118B: RF Input On Rear Output On Front