Transmit Receive Switch, Model TRS-500M-100M-1.5KW
100 MHz – 500 MHz1500 watts
|
|
Transmit Receive Switch Model: TRS-500M-100M-1.5KW General Specifications
- Frequency Range: 100 – 500 MHz
- Power Rating: 1500 Watts CW
- Prime Power: 12 VDC & 375 VDC
- RF Connections: J1 Common Antenna Port, SC-F J2 Transmitter Port, SC-F J3 Receiver Port, SMA-F
- DC Connections: J4 9-Pin D sub
IFI Transmit Receive Switch Specifications
- Operation Fequency: 100 – 500 MHz
- RF Power Handling: 1500W CW
- Pulse Width: Up to CW
- Duty Cycle: CW
- Insertion Loss: 0.5 dB max.
- Isolation: 50 dB Transmitter Port: 60 dB min. Receiver port
- Impedance: 50 Ohms nominal.
- VSWR: 1.5:1 max. S11 all ports
- VSWR Load Tolerance: 3:1 any phase angle @ full power 6:1 any phase angle for 10 msec
- Switching Speed: 50 microseconds max (25 usec typical)
- Switching Rate: 2 kHz max
- Max Video Leakage: In Band: 0.5V Total: 3.5V
- Video Leakage Duration: 250 nSec
- Control Logic: Balanced differential TTL line. Impedance: 100 Ohms
- Connectors: SC-Female, Common Antenna Port SC-Female, Transmitter Port SMA-F, Receiver Port
- Power Supply: +12V @ 600mA & -375V @ < 50mA
- Operation Temperature: -20 to +70 degrees C
- Non-Operation Temperature: -40 to +80 degrees C
- Size: 4.5” x 4.4” x 2.3” approx.
Specifications above are at a case temperature of 25 degrees C.
Note: The Common port is DC grounded. There is built-in video filter at receiver port to minimize the leakage. The unit incorporates protection against lightning and high voltage spikes.
Specfications are subject to change without noticification © IFI-2011