1.0 – 18.0 GHz

1000 watts
Minimum Rated Power

Amplifier Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232
  • Solid State Power Supply

Gridded TWT Microwave Power Amplifiers - GT-1000 SeriesInstruments for Industry, GT-1000 Series Amplifiers provide outstanding RF performance. Our “GT-1000 Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field proven reliability and unsurpassed performance as the best in the industry. These products are available in a wide range of frequency bands from 1 GHz – 18 GHz at 1000 watts.

Operation safety and ease of use are paramount in IFI product designs. The IFI GT-1000 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the GT-1000 series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use. Our amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the GT-1000 Series amplifiers can be easily customized with harmonic filters or other options. With this capability and its reliable elegant design, the GT-1000 series amplifiers are the perfect amplifier for your microwave needs. IFI offers different size packages and configurations to best suit your application. A product and design built to last!

Model Number Frequency Range
Rated Power
(watts min.)
P1dB Power
(watts min.)
(dB min.)
Size (Inches)
(W x D x H)
GT42-1000 2.0 – 4.0 1000 500 60 7.0 600 Rack Integrated
GT7525-1000* 2.5 – 7.5 1000 500 60 8.0 600 Rack Integrated
GT84-1000* 4.0 – 8.0 1000 500 60 8.0 600 Rack Integrated
GT186-1000 6.0 – 18.0 1000 500 60 8.0 600 Rack Integrated
GT188-1000 7.5 – 18.0 1000 500 60 8.0 600 Rack Integrated
GT128-1000 8.0 – 12.4 1000 500 60 8.0 600 Rack Integrated
GT1812-1000 12.0 – 18.0 1000 500 60 8.0 600 Rack Integrated

* Over the majority of the band


Standard Features for IFI GT-1000 Series TWT Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Filament/Beam Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display


IFI GT-1000 Series TWT Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type 716 Female up to 7.5 GHz, 4 – 8 GHz is WRD350 8 – 12 GHz is WR90, 12 – 18 GHz is WR62, 7.5 – 18 GHz is WRD750, 6.5 – 18 GHz is WRD650 Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Pulse Input: BNC Female Front Panel {TTL into 50 ohms standard} consult factory for special requirements
  • Pulse Width Range: Up to CW
  • PRF Range: Up to 100 kHz Standard, Higher PRF ranges available consult factory
  • Duty Cycle: Up to CW (Higher PRF ranges subject to TWT specification)
  • Rise & Fall Time: 25 nsec nominal; 40 nsec maximum
  • Pulse to Pulse Jitter: ±5 nsec maximum
  • Pulse Width Jitter (Distortion): ±5 nsec maximum
  • Pulse Recovery Time: 150 nsec maximum
  • Pulse Delay: 250 nsec maximum / 180 nsec typical
  • Pulse Droop: 0.5 dB/100 usecs, 0.1 dB/10 usec
  • Power Output Stability: 0.2 dB Pulse to Pulse at constant drive level & PRF
  • Pulse On/Off Ratio: 80 dB
  • Phase Stability Pulse to Pulse: ±1 degree nominal
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet operating, 50,000 non-operating
  • Cooling System: Air cooled, self contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table
  • Spurious Outputs: <-60 dBc nominal
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI GT-1000 Series TWT Amplifiers

  • Option 103 G/D: VSWR Reflected Power Protection “Graceful Degradation Feature” which will automatically reduce the input drive and fold back the output power when the average reflected power exceeds a preset limit of 3.0:1. The unit operates without damage or oscillation into any magnitude of phase or load impedance.
  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 118F or R: Front Panel RF Connections 118R for Rear Panel RF Connections
  • Option 123F or R: Reflected RF Sample Port -40, -50 or -60 dB N or SMA, Front or Rear Panel


Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2018 All rights reserved